shearing) 및 비틀림(torsion)등의 여러 가지 힘을 받는다. 그리고 크랭크축의 크랭크 저널 중에서 기관 중앙부에 있는 저널은 크랭크 앞쪽 또는 뒤쪽의 저널보다 큰 압력을 받게 된다.
크랭크 핀 2개에 대하여 1개의 저널을 가진 경우에 저널의 지름을 구하여 보기로 한다. 실린더의 지름 (), 저널의 지름 (
fatal damage in some aspects as physical, financial, and time. We have called failure.
Let take attention about that how many causes about metal failure and suggestion about them. And we will show the several examples of bolt failures that have been involved in a certain environment. Through this article we can know how to use a bolt in appropriate situation and make a more sustainable bolt.
Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
사질토의 Mohr-Coulomb 파괴곡선은 평면의 원점을 통과하므로 강도정수 2개 중에서 점착력는 0이 되어 Mohr-Coulomb 파괴공식은 단순히가 된다.
사질토는 전단변형시 대체로 부피변화를 일으키는데, 조밀한 상태에 있는 사질토는 부피증가를, 그리고 느슨한 상태의 사질토는 부피감소를 일으킨다. 미시적인
지반이 여러 가지 외력을 받았을 때 나타내는 현상은 크게 두 가지 인데, 지반의 침하(settlement)와 변형에 의한 파괴(failure)가 대표적인 현상이다.
흙은 엄격히 말하면, 다른 재료들과 마찬가지로 인장과 전단에 의하여 파괴되나, 대부분의 경우 인장 저항력이 무시할 수 있을 만큼 작기 때문에, 실질적으
1. 얕은 기초의 파괴 형상
o 극한지지력(ultimate bearing capacity), qu : 기초를 지지하는 지반이 전단파괴가 일어날 때까지 받을 수 있는 압력
o 허용지지력(allowable bearing capacity), qa : 극한지지력/안전율
o 허용하중, Qa : 허용지지력 x 기초의 바닥면적
o 기초의 파괴 모드
- 전반 전단파괴(genral shearfailure) :
sheared off and the big screw
prangs the wall with an earsplitting K-K-KWANG!
INT. PORT TO TORPEDO ROOM 8
With the outer tube-doors torn off, seawater slams in, busting the inner
hatches. Two-foot thick columns of water, like fire-hoses of the gods,
blast into the room. Everything vanishes instantly in white spray.
INT. CONTROL RM/ATTACK CENTER 9
Everyone is hurled off his feet. The planesman fli
Many factors, such as the way to experiment shear strength, the choice of shear strength, the way to analyze, the characteristic of shear strength, slope‘s geometrical condition and the degree of uncertainty of other conditions, the cost spent to lower slope’s slope or to decrease the height, the result and the amount of damage when slope is destructed, judging whether slope is the permanent